Will this need a fan cycle of some sort

Removed a old ass Carrier 5 ton split , and installed a Nordyne (airtemp) 5 ton split VT4BD-060K , and its in a Gas Station , and they sometimes need the AC on after cooking on the grill , and when its 40 outside Im not sure this heat pump will like to run in AC .... or will it be ok ?

DSC no LCD display

i upgraded my board to a used pc5010 board and a new Powerseries keypad.

The backlight shows up on the keypad and the amber trouble light flashes but there is no lcd display and none of the buttons are responsive. Is this a board failure ? all the wiring and power are correct.

Let's not forget the toxic Ford we knew before crack: Keenan

Toronto can ill afford to forget the lessons it learned amid the disaster of the Ford administration, barely six months into his term.

Maytag washer spins during wash cycle and does not agitate.

The washer completes all other cycles correctly except for the wash and rinse cycles it spins in counter clockwise direction and does not agitate. Washer is about 25 years old. Sounds like transmission but would like to get other opinions or a way to be sure that is the problem.

'Ford Nation' future uncertain after Rob Ford's death

The Ford clan vows to continue Rob Ford's legacy. But, without its singular hero, the fate of 'Ford Nation' is unclear.

Semi Hermetic Compressor Rebuild

I am rebuilding a little 2HP, Dorin compressor. I've replaced the bearings, rods and pistons, valve plate and had the motor rewound. It is all back together again....However, with the head on and the front still off, I can only hand turn the crank until one of the pistons comes up to hit the valve then it stops. it will not hand turn on through and continue back down. My question is....Is it supposed to be able to turn freely all the way through? I know it will with the head off, but with the head on, should it? This is a Dorin compressor on a blast freezer. The pistons have a tit on top which fits into a hole on the valve plate. It looks like it is designed to push the suction valves open. I've never seen this before. Every piston I've ever witnessed was flat on top. 30 years experience.



Thank you,



Joey

Total Solar Eclipse Aug. 21 2017

Road Trip!!!!!

Plan next year's vacation around this......



http://www.greatamericaneclipse.com/nation/